Jinan Dongle Machinery Co., Ltd 
- Home
- About Us
- Product Center
- Customer Cases
-
News
To provide you with cutting-edge information about our industry！
- Contact Us
This machine is suitable for raw paper slitting in the paper tube industry, with high slitting efficiency, flat end face, large closing diameter. The upper paper is fed without a shaft, and the lower paper is pneumatically fed.
This machine is suitable for raw paper slitting in the paper tube industry, with high slitting efficiency, flat end face, large closing diameter. The upper paper is fed without a shaft, and the lower paper is pneumatically fed.
It greatly reduces the labor intensity of personnel, and the cutting tools are equipped with 20 upper and lower bottom knives as standard.
01. The local frequency conversion speed regulation saves 60% of energy compared to traditional starting methods, and the equipment starts and stops smoothly, making it easy for personnel to control the equipment.
02. The paper loading system, displacement system, and paper unloading system are controlled by hydraulic pressure, resulting in higher equipment stability.
03. The clamping system adopts a shaft free clamping type, which has higher work efficiency.
04. The unwinding system is equipped with an expansion key and an expansion shaft, which provides higher stability for the paper tube and a more neat surface for the unwinding tray,
05. The tool is fixed in a clamping style using cash technology, making it easy to adjust the tool. The tool has high verticality, and the paper processing error is small.
|
Number |
technical requirement |
Specific parameters |
Number |
technical requirement |
Specific parameters |
|
1 |
input voltage |
Three phase four wire 380V |
12 |
Base paper width |
1600MM |
|
2 |
Host power |
10KW |
13 |
Base paper diameter |
1200MM |
|
3 |
Main drive motor |
7.5KW |
14 |
Roll diameter |
1200MM |
|
4 |
Transmission mode |
Chain Machinery |
15 |
Cutting width |
>40MM |
|
5 |
Cutting method |
Butterfly shaped 108 cutting tool |
16 |
Weight of base paper |
50-600g |
|
6 |
Main engine speed control frequency converter |
7.5KW Haipu Monte |
17 |
Braking method |
Dual pneumatic constant pressure brake |
|
7 |
Speed regulation method |
frequency control |
18 |
Slitting speed |
200、min |
|
8 |
Intensive measures |
Hydraulic tightening |
19 |
Host specifications |
3600×3300x1000 |
|
9 |
Top and bottom paper method |
Automatic hydraulic cutting |
20 |
Overall weight |
3T |
|
10 |
Edge suction system |
Special fan 2.2Kw |
21 |
Number of employees |
1 |
|
11 |
Correction system |
Automatic correction (motor) |
22 |
Cylinder brand |
AirTAC |
EN
中文
Jinan Dongle Machinery Co., Ltd
Online consultation